Qsc-audio DSP-30 Bedienungsanleitung PDF herunterladen (Seite 8)

Installation: Unbalanced Audio Connections

Connecting Audio Inputs and Outputs

Unbalanced inputs can be

used if required. If unbal-

anced audio sources are used,

it is preferable to use an ap-

propriate audio transformer (or

other unbalanced-to-balanced

“converter”) to provide a bal-

anced input. If this is not pos-

sible, then it is recommended

that the negative terminal and

shield terminal be connected

to one another with a jumper

wire.

UNBALANCED

XLR

TRS (1/4-inch)

TS (1/4-inch phone)

This style of plug

automatically connects

the negative terminal to

shield when inserted in

the jack.

NOTE for above abbreviations: TRS- tip, ring, sleeve (3 conductors)

TS- tip, sleeve (2 conductors)

All audio connections should be balanced to ensure the best performance. Unbalanced signals may be used if necessary; follow

the wiring guidelines below for recommended unbalanced termination.

The audio input jacks are female 3-pin XLR /TRS “combo” connectors. They will accept male XLR plugs or TRS (tip-ring-sleeve)

1/4-inch phone plugs. The audio output jacks are male 3-pin XLR connectors.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Keine Kommentare

Qsc-audio DSP-30 Bedienungsanleitung Seite 8